Skip to main content
Office Disinfecting and Sanitizing Fogging Service in Toronto

Office Sanitizing Business Fogging System!

The Steam Mist Surface Unit is a completely portable, hand-held, point to spray misting disinfection unit. Simplified to spray surfaces for 5 seconds per square foot for all disinfection. A fully multiple Surface Units can reduce contamination and clean rooms to 10 minutes. This unit can be used on hard, for non-porous, and high touch surfaces. Reaches full surfaces and on areas that regular disinfectants cannot ever reach. The Steam Mist Surface Unit is a complete portable, for a fast-acting, hand-held, point, and sprays misting disinfection system. This full system is the ultimate tool in disinfecting all type of spaces, whether is used for specified service needs or acquired for all daily usage. The Steam Mist Surface Unit is definitely one of the best choices to make certain that can facility is using the best technology in currency markets. This single applicator surface unit enables the disinfection of all types of surfaces including high-touch, fully sensitive equipment, and electronics. The room is fully safe to enter within minutes after the ionized Hydrogen Peroxide (iHP) mist has been applied.

For a single person application. The handheld application method gives all technicians the freedom to easily manipulate and fully treat all sides of desired objects. Killing bacteria and inactivates viruses that may reduce the risk of exposure from pathogens on all treated surfaces (See EPA label). It helps prevent build-up odors by killing all odor-causing all sorts of bacteria. Validated to comply with all GMP (Good Manufacturing Practice) Standards. Aerosolized microns and sprays like a gas. Goes over and above, beyond, under, and all around disinfecting sprays units and wipes.Very effective for a whole room treatment in just under 46 minutes including application time and contact time Lesser time is typically needed for smaller sized rooms A fully transportable The application is not a vapor! The Steam Mist Environmental System is transportable, fully automated, remote-controlled and provides complete space decontamination using three (3) applicators per system

Whether is integrating into a facility’s current decontamination protocol and receiving an iHP Steam Mist service by GTA Restoration trained technician, one (1) Environmental system offers effective full whole complete room decontamination in just over 76 minutes (for a room 3,663.8 ft3/104 m3), including all application time, contact time, and full aeration time. Lesser time is typically needed for full smaller size rooms and multiple systems could be used for full larger spaces.

GTA Restoration Uses Professional Cordless Electrostatic Backpack Sprayers by Victory

Disinfection & Sanitization Services in Toronto

Fogg Disinfection & Sanitizing the Following:

GENERAL FOOD SANITIZING USE AREAS

- Manufacturing Plants
- Supermarkets-Grocery Stores
- Food Handling Establishments
- Packing Plants-Restaurants
- Fast Food Restaurants
- Food Processing
- Reducing Surface Contamination

OTHER FOOD SANITIZING AREAS

- Receiving
- Storage
- Preparation
- Packing (Canning, Bottling, Wrapping, Boxing)
- Waste Storage
- Serving Areas
- Enclosed Processing Systems

FUTURE FOOD USE SANITIZING AREAS

- Pre/Post Harvests of Fruits & Vegetables
- Increasing Storage/Shelf Life of All Foods Including Meat, Poultry, & Fish
- Processing and packaging of food

NON-FOOD SANITIZING AREAS

- Garbage Rooms
- Lavatories
- Entry vestibules
- Offices
- Locker-Rooms
- Machine Rooms
- Boiler Rooms
- Garages
- Mop ClosetsStorage

For more information on our services, contact us @ 1-800.506-6048 or visit us @ www.GTARestoration.com – 24-hour Emergency Service: Water Damage Restoration, Fire Damage Restoration, Flooded Basement Cleanup, Mold Removal & Remediation – serving Toronto & the GTA.

#1 Office Disinfecting and Sanitizing Fogging Service in Toronto
https://bit.ly/3F5uw3D

Comments

Popular posts from this blog

Restoring residential & commercial buildings across Toronto & the GTA GTA Restoration Services of Toronto! Welcome to our Restoration Services Toronto Blog where you can learn all about 24-hour Emergency Plumbing Services: Water Damage Restoration, Fire Damage Restoration, Flooded Basement Cleanup, Mold Removal & Remediation, Biohazard Decontamination, Sanitizing and Disinfecting Restoring Residential & Commercial Buildings all across Toronto & the GTA. Here are the different restoration services that we offer: Water Damage Restoration Flood Restoration Fire Restoration Mold Removal Toronto Sewage Clean up Emergency Plumber Waterproofing Home Renovation & Improvements Odor Removal Specialty Drying Water Leak Detection Property Inspection Emergency Roof Repair Biohazard and Crime Scene Cleanup Insurance Claims Bathroom & Kitchen Renovations Condominium Restoration GTA Restoration Services Gallery - Photos / Images!
Should you call a plumber? For plumbing issues, Always call a Plumber! Most of us will at some point in our lives have to deal with a plumbing issue, some of these issues are not very difficult to fix and we can fix them on our own but in some cases having a plumbers help is necessary. Our professional emergency plumbing team has come up with a few common problems that people might experience and should call a professional for. 1. Dripping Faucets If you have a dripping faucet it may not seem like a big deal, and you might even consider simply ignoring it in order to avoid having to pay a plumber to come and fix it but having a dripping faucet can cause your water bill to go up dramatically, and over time you will end up actually saving money by getting a plumber to help. In most cases dripping faucets are not very easy fixes and calling a plumber is required to make sure that it`s done properly and the right tools are used. 2. Frozen Pipes If you have frozen pipes we highl
Platon Installation Toronto GTA Restoration Property Waterproofing in Toronto? Waterproofing is the process of sealing or blocking any area that water can seep into. When you water proof something you are making it water resistant. Lots of objects are water proofed or water resistant to avoid damage such as cameras and watches. Waterproofing first became popular when boats were water proofed with pitch or tar. Although over time it has become much more popular in many industries. Plumbing is one of the most common industries when people think about waterproofing, all tubes and pipes must be water proofed and sealed. This is usually done by using o-rings and rubber gaskets. Another technique commonly used is water-repellent coatings usually this is what’s used to water proof concrete walls in basements, decks and other structures built in wet or damp areas. Why is waterproofing concrete necessary? If concrete is wet for too long it will get softer and start to crack. Any structu